About FcNongTanong

FcNongTanong · 08-05-2015

Hi Expert, We have some question on this about State of client that show "Not Ready" state that may cause by call in, call out, client press Not Ready Button on CAD, and another...But we want to know how to identify client press "NOT READY" by himsel...

FcNongTanong · 08-05-2015

Hi Expert,As we check on Cisco ISE 1.4 document as line below we found this case support WLC 5508 version 7.6.130http://www.cisco.com/c/en/us/td/docs/security/ise/1-4/compatibility/ise_sdt.html?referring_site=RE&pos=1&page=http://www.cisco.com/c/en/u...

FcNongTanong · 08-04-2015

Hi Cisco Experts, We have issue about RNA calls on "Agent State Detail table" and "CSQ Agent Summary table" show mismatch.On the "Agent State Detail table" has 1 RNA call (check from cause code show "32763") but on "CSQ Agent Summary table" show 0 RN...

FcNongTanong · 05-25-2015

We have any question about WebEx on premise server. We just want to know how to redirect http://testwebex.com to https://testwebex.com. So please inform us how to configure that on WebEx server side.

FcNongTanong · 11-28-2015

Hi Sandeep, Thank you for response. But on my issue was AP can join to WLC normally inthe first time. But in sometime AP will go to Not Join state and go to Joined state again by itself. In 1 day we found 1 AP change state about 30 times. Please help...

FcNongTanong · 11-28-2015

Hi Leo, We just found issue same and please follow information below, But this just swing from Joined state and Unjoin state like flapping. AP#sh version Cisco IOS Software, C2700 Software (AP3G2-K9W8-M), Version 15.3(3)JA5, RELEASE SOFTWARE (fc1)...

FcNongTanong · 08-05-2015

Hi,Yes, as check on Agent detail found 1 RNA call but on summary report show 0 RNA call. So we want to know call that lost from summary report. Cheers,FN

FcNongTanong · 05-27-2015

Hi Dejan, Thank you for answer. We should be check firewall already allow port 80 for this CWMS right ? So if allow port 80 for this CWMS on firewall these should be auto re-direct from port 80 to 443 ? -Tanong

FcNongTanong · 05-27-2015

Hi Bro,This is user site we found that not automatic redirect.(for admin page we not try) And thank you very much for inform. We already change this trade to Conferencing.

Member Since	‎05-31-2014 03:58 AM
Date Last Visited	‎07-04-2018 12:05 AM
Posts	14

User Statistics

User Activity

UCCX Historical Report: How to check Agent press "NOT READY" button

Compatible of ISE 1.4 with WLC 5508 version 7.6.130.0 and 8.0.115.0

UCCX Historical Reporting RNA calls mismatch

How to redirect WebEx from http to https

Hi Sandeep,

Hi Leo,

Hi,Yes, as check on Agent

Hi Dejan, Thank you for

Hi Bro,This is user site we