Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
704
Views
0
Helpful
2
Replies

Configuring Cisco Access Server radius to work with Wireless Access Point

oyaje
Level 1
Level 1

‎03-19-2004 06:23 AM - edited ‎03-10-2019 07:43 AM

How can I configure my Cisco AS5350 aaa for RADIUS to work with a wireless access point?

Labels:
0 Helpful
2 Replies 2

irisrios
Level 6
Level 6

‎03-25-2004 06:43 AM

On the Radius server, you need to configure, the "radius-server host" , define the AAA server group, configure RADIUS login authentication and some more paramenters.

Check out the following documents for a detailed configuration example:

Configuring RADIUS and TACACS+ Servers

http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_guide_chapter09186a0080184a9c.html

You have to configure the "radius-server vsa send [accounting | authentication]" on the wireless access point to recognise the VSAs.

0 Helpful

Naveen Kumar
Level 4
Level 4

‎09-05-2013 09:55 AM

Please check the configuration examples  for Cisco AS5350 for radius:

http://www.cisco.com/en/US/docs/routers/access/as5350/software/configuration/guide/54shcfg_ps501_TSD_Products_Configuration_Guide_Chapter.html

0 Helpful
Customers Also Viewed These Support Documents