Network Access Control

Hi!When I try to add Active Directory as an Identity Store, I received:Connection test to 'jerico.lan.vusecurity.com' failed.Further information on status:   - Can not resolve network addressFrom console nslookup: nslookup lan.vusecurity.comTrying "l...

We're trying to replace an existing 3315 ISE appliance with a 3415; the plan was to do a config backup on the 3315, upgrade & patch the 3415 to the same level, then restore the backup onto the 3415.All goes well until the restore, which fails with a ...

If someone has done a 1.2 upgrade, can you let me know about how long it took?Thanks!Sent from Cisco Technical Support iPhone App

Hi All,I recently made some changes to the way my Tacacs server (ACS4.2) handled groups etc..This all works fine and when I log onto my devices I get prompted for my credentials, which authenticate against AD. However, since I made these changes none...

Hello,As of today, i have experinced a problem with my ACS.After a reload my ACS is stuck, and have been stuck there for more than 3 hours, at the boost screen.The last line that it as writen is:INIT: Version 2.85 booting..If i do a hard reboot of th...

Hi to everyone.after apply this patch:acs patch install 5-3-0-40-9.tar.gpg repository downloadWhen I try to access de web console are missing objects or I received a browser error "redirect loop detected"any ideas?Thanks!

We have Four ACS 5.4 Appliances , out of which one is Primary ( in DC) and Other Appliances are kept at different Zonal Locations. We have now the requirement for EAP-TLS deployment for Wireless  . Need to Know do we need to generate CA certificate f...

Hi,I have a ACS 5.3 and try to configure ACS for Send syslog.I configure the ACS with this guide: https://supportforums.cisco.com/docs/DOC-32614But no syslog are send by ACS.....strange....If you are idea....Best regards      

Hi Experts,I am new with ISE, I have configured ISE & Domain computers for PEAP authentication. initially machine gets authenticated and then starts going MAB.Authentication policy:Allowed protocol = PEAP & TLSAuthorization Policy:Condition for compu...

Hi,Can we have ASA in  Active/ Active in single context mode.If Active/ Active is  possible in single context mode, then in best practices, Active/Active is  prefered or Active Standby. Thanks

Hi all,We are going to implement dACLs through ISE. This dACLs will have arround 400 ACEs for each user.The Cisco switch platform will be the following:4510450737502960SThese platforms are already running EEE 802.1x authentication and have SVI ACLs c...

Hellolooking for documenation how to setup ISE to authenticate VPN users. Right now we are usign ACS 4.2 to provide dACL and authetnication but would like to migrate this feature to ISE. Wea re using microsoft AD.Any good docs, white papers, field no...

Hello,I have typical deployment of EAP-TLS in wireless network, with ISE and AD. The  "Perform Binary Certificate Comparison with Certificate retrieved from LDAP or Active Directory", feature is activated.The problem is, when user accound in AD is di...