03-06-2014 01:05 AM - edited 03-10-2019 09:29 PM
We have an existing ACS 5.4, 1 primary, 1 secondary. Im not really sure which procedure to follow. On the upgrade document from Cisco, you need to upgrade the log collector, then the secondary, then the primary. In our setup, the Primary server is the log collector. There is a note that in this scenario, we need to promte the secondary as the new primary.
Lets say, ACS1b primary, ACS2a secondary:
So this is where it confuses me.When you change the Secondary to the new Primary server, does this mean that the log collector will now be the OLD Primary (ACS1b), or does it also change to ACS2a?
03-09-2014 12:35 AM
Cisco doc really get one confused. I agree on that.
Now, I opened a TAC case to get things clarified. My scenario is like yours except two things:
1- I have ACS 5.3.
2- I have the secondary as a log collector.
The TAC engineer confirmed that after you de-register (that means both servers are standalone now) you need to upgrade the log collector first. (in the scenario of having only two ACS servers, one primary and one secondary).
From my point of view, it does not matter which one you pugrade if all your servers in standalone mode. it would matter more if you have more than two servers.
if more than two servers exist you need to isolate one server only and upgrade it while others are still in one cluster. In two-servers-only scenario, when you de-register then you will have no servers in one cluster so you can upgrade whatever you want. Your only concern will be the logs and how will they be kept during the upgrade of the log-collector. As per the TAC you have to use external syslog server and configure it as a remote logging target on both srevers before doing the upgrade.
HTH
Amjad
03-31-2014 08:20 PM
Hello,
I tried to fix that situation when I was working for Cisco and I couldnt make it.
I suggest the following.
DE register the deployment in others words made both standalone/primary. Upgrade each ACS separate and then re register those again.
Regards,
Erdelgad
10-27-2016 06:31 AM
If
ACS1b is secondary and Log Collector
ACS2a is primary
then the secondary cannot be deregistered as it runs a Log Collector according to the error message. It is a dead end. Any tips?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide