Converting SNS-3415 from ACS to ISE

[William Eckler]

This so far hasn't been the easiest journey... I have a SNS-3415 that was bought only 2 years ago.  So as I understand it I need to flash the bios on the SNS-3415 and then load the ISE software.  Which software do I load and which bios update software do I use.  When I look in the downloads section it says:  Release SNS 35x5.  Obviously an SNS 3415 doesn't fit into 35x5... Do I just use this SNS 35x5 software on the SNS-3415 and it work or what?

Bill

IT Network / Systems Engineer .ılılı..ılılı. CISSP

[hslai]

Please use CIMC 2.0.4c for SNS-3400 series. See Field Notice: FN - 70227 - Cisco Identity Services Engine Might Exhibit Server Stability Issues on SNS-3415-K9 and SNS-3495-K9 - Workaround Provided

[William Eckler]

Do I also use the 3515 ISE software on the 3415 with the bios version you mentioned?

[William Eckler · Accepted solution]

Answering my own question Cisco could have but didn't.  The reason I didn't see any 3415 ISE 2.4 downloads is because there aren't any... ISE 2.3 is the last version for the 3415.

[Jason Kunst · Accepted solution]

Correct per ise 2.4 release notes the supported hardware

https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/release_notes/b_ise_24_rn.html#id_64711

Also there isn’t specific software for an appliance model. The iso installs on either appliance or vm


https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/install_guide/b_ise_InstallationGuide24/b_ise_InstallationGuide24_chapter_01.html