CSACS failed attempt logs pix's own ip as callerid

[MARK BAKER]

I have noticed that failed attempt logs for our pix in CSACS 4.2 shows the pix's own ip address as the callerid of the failed attempt. This makes it difficult to track failed attempts back to the originating device.

Is there a way to have the pix send the actual ip address of the device originating the login attempt?

pix version is 6.2(2)

Thank you

[didyap]

I am not aware of a way to do this. Did you find some way to do this?

[MARK BAKER]

I have not found a way to do this. Are you experiencing the same situation?