05-05-2016 09:54 PM - edited 03-10-2019 11:44 PM
Hello,
We are hitting bug CSCuw57593:
We tried to bypass the captive portal with "config network web-auth captive-bypass enable" on the WLC, reloaded it, but the mini pop-up still pops up =(.
Is this behavior expected? The bug info is kinda short. Is there any other way to get rid of the Captive Network Assistant?
Solved! Go to Solution.
05-10-2016 03:04 PM
Hi Pamela-
I believe you are hitting the following bug:
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCuj18674
Upgrading to a newer version of code on your WLC should fix your problem.
Also, please note that v 7.5 has been deferred by Cisco due to severe issues, thus it is recommended that you upgrade from that version.
The current recommended versions are:
I hope this helps!
Thank you for rating helpful posts!
05-10-2016 03:04 PM
Hi Pamela-
I believe you are hitting the following bug:
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCuj18674
Upgrading to a newer version of code on your WLC should fix your problem.
Also, please note that v 7.5 has been deferred by Cisco due to severe issues, thus it is recommended that you upgrade from that version.
The current recommended versions are:
I hope this helps!
Thank you for rating helpful posts!
05-11-2016 07:59 PM
We upgraded to 8.1.101, and indeed fixed the captive-bypass behavior. Thanks a bunch!
05-12-2016 10:39 AM
Fantastic! Glad the issue was resolved! :)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide