About Pamela Martinez Barajas

Pamela Martinez Barajas · 01-31-2017

Hello, My customer has a report regarding random clients at their headquarters, where clients on 2 floors were disconnecting (clients are not roaming btw. APs). The only way to get the clients connected were to get them reconnect manually. The Cont...

Pamela Martinez Barajas · 12-28-2016

Hello, I'm trying to setup a Cisco Prime Infrastructure Server so that it sends email notification every time a change is detected in the configuration, and every time a new device is added to the inventory. I went through the user guide, and I also...

Pamela Martinez Barajas · 05-05-2016

Hello, We are hitting bug CSCuw57593: Symptom:When trying to go through BYOD flow using embedded mini browsers, the client get an error "unsupported browser".Conditions:ISE 1.4, iOS 8 and laterWorkaround:manually launch safari of other browser and...

Pamela Martinez Barajas · 08-27-2015

Hello Experts, My customer has installed a bunch of 3925E routers, so far we've replaced 3 of them presumably because of FN - 63723. I've been able to corroborate it from the last replacement, since I had access to the faulty fan tray in order to che...

Pamela Martinez Barajas · 07-14-2015

Hello Experts. Cisco Prime 2.2 Installed The used details under Monitor>Clients and user hangs. The Client Statistics task is stuck in running, tried disabling/reenabling the task, stopping/starting the application, reloading the server, and the tas...

Pamela Martinez Barajas · 10-09-2017

I gues you've already figured this one out, but in case you didn't, you need to re-deploy the policies to the sensor after the SMC upgrade, and then it all should go well with the sensor upgrade.

Pamela Martinez Barajas · 02-01-2017

Okay, will check on the client side. Thanks a lot for the quick answer.

Pamela Martinez Barajas · 12-30-2016

Thanks a lot, Marvin.

Pamela Martinez Barajas · 05-11-2016

We upgraded to 8.1.101, and indeed fixed the captive-bypass behavior. Thanks a bunch!

Pamela Martinez Barajas · 12-17-2015

Did you figure out what the problem was?

Member Since	‎08-24-2009 11:37 AM
Date Last Visited	‎02-04-2021 10:31 AM
Posts	30
Total Helpful Votes Received	70

User Statistics

User Activity

%DOT11-4-FLUSH_DEAUTH: / %DOT11-4-CCMP_REPLAY: - AIR-CT5508-K9 running version 8.0.121.0 - AIR-CAP2702E-N-K9 Version 15.3(3)JA5

Cisco Prime Infrastructure 3.1 - Tracking configuration and inventory changes

CSCuw57593 on ISE 1.4 & WLC 7.5.102.0

3925E - Field Notice FN - 63723 - How to retrieve Fan Tray Serial Number from CLI

Cisco Prime Infrastructure 2.2 - Users historic information not displayed / Client Statistics task stuck in running

Re: getting FAILED 200_pre/006_check_snort.sh error while upgrading FTD image on ESX server from 6.1.0 to 6.2.0

Okay, will check on the

Thanks a lot, Marvin.

We upgraded to 8.1.101, and

Did you figure out what the