cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

979
Views
0
Helpful
5
Replies

CWA with WLC Firmware 7.0.228 and ISE 1.1.1

Hi,

Does Cisco ISE central web authentication supports on WLC version 7.0.228 ?

My customer has many access points which are support only for firmware code 7.0.228.

Cisco ISE version 1.1.1

WLC 5500 Series but the existing access point is cannot support to 7.3

Thanks,

Pongsatorn Maneesud

Everyone's tags (6)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Highlighted
Advocate

CWA with WLC Firmware 7.0.228 and ISE 1.1.1

AFter checking both the ISE and the WLC release notes it looks as if CWA with Radius NAC support was introduced in 7.2.110

WLC -

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_2_110_0.html#wp784178

ISE -

http://www.cisco.com/en/US/docs/security/ise/1.1.1/compatibility/ise_sdt.html#wp55038

Hope that helps.

Tarik Admani
*Please rate helpful posts*

Tarik Admani
*Please rate helpful posts*

View solution in original post

Highlighted
Cisco Employee

Re: CWA with WLC Firmware 7.0.228 and ISE 1.1.1

Tarik is correct, you need 7.2.x and later to use CWA with ISE. Here is a general summary of features supported on ISE on 7.0 and 7.2 versions of code:

Scenarios                                                          WLC 7.0                                             7.2 

802.1X Auth                                                     Yes                                                      Yes

802.1X + Posture                                            Yes                                                      Yes

802.1X + Profiling                                           Yes                                                      Yes

Web Auth + Posture                                       No *                                                   Yes

Web Auth + Profiling                                      Inventory only *                         Yes

Central Web Auth(CWA)                               No *                                                   Yes

Local Web Auth(LWA)                                   Yes                                                      Yes

View solution in original post

5 REPLIES 5
Highlighted
Enthusiast

CWA with WLC Firmware 7.0.228 and ISE 1.1.1

Which AP's do they have?

Highlighted

CWA with WLC Firmware 7.0.228 and ISE 1.1.1

AP1230.

Highlighted
Advocate

CWA with WLC Firmware 7.0.228 and ISE 1.1.1

AFter checking both the ISE and the WLC release notes it looks as if CWA with Radius NAC support was introduced in 7.2.110

WLC -

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_2_110_0.html#wp784178

ISE -

http://www.cisco.com/en/US/docs/security/ise/1.1.1/compatibility/ise_sdt.html#wp55038

Hope that helps.

Tarik Admani
*Please rate helpful posts*

Tarik Admani
*Please rate helpful posts*

View solution in original post

Highlighted
Cisco Employee

Re: CWA with WLC Firmware 7.0.228 and ISE 1.1.1

Tarik is correct, you need 7.2.x and later to use CWA with ISE. Here is a general summary of features supported on ISE on 7.0 and 7.2 versions of code:

Scenarios                                                          WLC 7.0                                             7.2 

802.1X Auth                                                     Yes                                                      Yes

802.1X + Posture                                            Yes                                                      Yes

802.1X + Profiling                                           Yes                                                      Yes

Web Auth + Posture                                       No *                                                   Yes

Web Auth + Profiling                                      Inventory only *                         Yes

Central Web Auth(CWA)                               No *                                                   Yes

Local Web Auth(LWA)                                   Yes                                                      Yes

View solution in original post

Highlighted

Re: CWA with WLC Firmware 7.0.228 and ISE 1.1.1

Thank you so much.