Disk monitoring on ISE physical appliance

[LAN team]

Hello,

As we have dead disk several time without been advised by any ISE logs.

I want to know if there a way to get disk status (running/failed/removed) by SNMP from CIMC I guess  as this information seems to not be forwarded to the ISE application layer ? 

Thank you.

[Marcelo Morais]

Hi @LAN team ,

 since ISE Appliance is a UCS-C, worth the shot to check the following link: UCS Server RAID Guide - LSI MegaRAID SAS Controller, special attention to Monitoring Array Health.

Hope this helps !!!