Solved: Re: Dynamic VLAN Assignment

craiglebutt · ‎06-04-2018

HI

I'm trying to setup vlan assignment via wireless, have followed Dynamic Attribute with ISE: VLAN Assignment.

Running on 2.2

Certain devices and users can only go to certain vlans.

The WLC has the VLANs and able to connect to them.

Only thing that have changed are the domain and attribute.

Everything looks fine, can see on radius logs it the user connects to vlan 631, but the actual device connects to vlan 630.

Screen shots attached and steps below.

Steps

	11001	Received RADIUS Access-Request
	11017	RADIUS created a new session
	15049	Evaluating Policy Group
	15008	Evaluating Service Selection Policy
	15048	Queried PIP - DEVICE.Device Type
	15048	Queried PIP - Normalised Radius.RadiusFlowType
	15004	Matched rule - Dot1X
	11507	Extracted EAP-Response/Identity
	12300	Prepared EAP-Request proposing PEAP with challenge
	11006	Returned RADIUS Access-Challenge
	11001	Received RADIUS Access-Request
	11018	RADIUS is re-using an existing session
	12302	Extracted EAP-Response containing PEAP challenge-response and accepting PEAP as negotiated
	12318	Successfully negotiated PEAP version 0
	12800	Extracted first TLS record; TLS handshake started
	12805	Extracted TLS ClientHello message
	12806	Prepared TLS ServerHello message
	12807	Prepared TLS Certificate message
	12808	Prepared TLS ServerKeyExchange message
	12810	Prepared TLS ServerDone message
	12811	Extracted TLS Certificate message containing client certificate
	12305	Prepared EAP-Request with another PEAP challenge
	11006	Returned RADIUS Access-Challenge
	11001	Received RADIUS Access-Request
	11018	RADIUS is re-using an existing session
	12304	Extracted EAP-Response containing PEAP challenge-response
	12305	Prepared EAP-Request with another PEAP challenge
	11006	Returned RADIUS Access-Challenge
	11001	Received RADIUS Access-Request
	11018	RADIUS is re-using an existing session
	12304	Extracted EAP-Response containing PEAP challenge-response
	12305	Prepared EAP-Request with another PEAP challenge
	11006	Returned RADIUS Access-Challenge
	11001	Received RADIUS Access-Request
	11018	RADIUS is re-using an existing session
	12304	Extracted EAP-Response containing PEAP challenge-response
	12305	Prepared EAP-Request with another PEAP challenge
	11006	Returned RADIUS Access-Challenge
	11001	Received RADIUS Access-Request
	11018	RADIUS is re-using an existing session
	12304	Extracted EAP-Response containing PEAP challenge-response
	12318	Successfully negotiated PEAP version 0
	12812	Extracted TLS ClientKeyExchange message
	12813	Extracted TLS CertificateVerify message
	12804	Extracted TLS Finished message
	12801	Prepared TLS ChangeCipherSpec message
	12802	Prepared TLS Finished message
	12816	TLS handshake succeeded
	12310	PEAP full handshake finished successfully
	12305	Prepared EAP-Request with another PEAP challenge
	11006	Returned RADIUS Access-Challenge
	11001	Received RADIUS Access-Request
	11018	RADIUS is re-using an existing session
	12304	Extracted EAP-Response containing PEAP challenge-response
	12313	PEAP inner method started
	11521	Prepared EAP-Request/Identity for inner EAP method
	12305	Prepared EAP-Request with another PEAP challenge
	11006	Returned RADIUS Access-Challenge
	11001	Received RADIUS Access-Request
	11018	RADIUS is re-using an existing session
	12304	Extracted EAP-Response containing PEAP challenge-response
	11522	Extracted EAP-Response/Identity for inner EAP method
	11806	Prepared EAP-Request for inner method proposing EAP-MSCHAP with challenge
	12305	Prepared EAP-Request with another PEAP challenge
	11006	Returned RADIUS Access-Challenge
	11001	Received RADIUS Access-Request
	11018	RADIUS is re-using an existing session
	12304	Extracted EAP-Response containing PEAP challenge-response
	11808	Extracted EAP-Response containing EAP-MSCHAP challenge-response for inner method and accepting EAP-MSCHAP as negotiated
	15041	Evaluating Identity Policy
	15006	Matched Default Rule
	22072	Selected identity source sequence - All_User_ID_Stores
	15013	Selected Identity Source - Internal Users
	24210	Looking up User in Internal Users IDStore - host/3Q6DZ72.someplaceelse.com
	24216	The user is not found in the internal users identity store
	15013	Selected Identity Source - All_AD_Join_Points
	24431	Authenticating machine against Active Directory - All_AD_Join_Points
	24325	Resolving identity - host/3Q6DZ72.someplaceelse.com
	24313	Search for matching accounts at join point - someplaceelse.com
	24319	Single matching account found in forest - someplaceelse.com
	24323	Identity resolution detected single matching account
	24344	RPC Logon request failed - STATUS_UNSUCCESSFUL,ERROR_RPC_NETLOGON_FAILED,3Q6DZ72$@someplaceelse.com
	24303	Communication with domain controller failed - uhlad01.someplaceelse.com,ERROR_RPC_NETLOGON_FAILED
	24343	RPC Logon request succeeded - 3Q6DZ72$@someplaceelse.com
	24470	Machine authentication against Active Directory is successful - All_AD_Join_Points
	22037	Authentication Passed
	11824	EAP-MSCHAP authentication attempt passed
	12305	Prepared EAP-Request with another PEAP challenge
	11006	Returned RADIUS Access-Challenge
	11001	Received RADIUS Access-Request
	11018	RADIUS is re-using an existing session
	12304	Extracted EAP-Response containing PEAP challenge-response
	11810	Extracted EAP-Response for inner method containing MSCHAP challenge-response
	11814	Inner EAP-MSCHAP authentication succeeded
	11519	Prepared EAP-Success for inner EAP method
	12314	PEAP inner method finished successfully
	12305	Prepared EAP-Request with another PEAP challenge
	11006	Returned RADIUS Access-Challenge
	11001	Received RADIUS Access-Request
	11018	RADIUS is re-using an existing session
	12304	Extracted EAP-Response containing PEAP challenge-response
	15036	Evaluating Authorization Policy
	15048	Queried PIP - EndPoints.LogicalProfile
	15048	Queried PIP - Network Access.AuthenticationStatus
	15004	Matched rule - Basic_Authenticated_Access
	15016	Selected Authorization Profile - PermitAccess
	22081	Max sessions policy passed
	22080	New accounting session created in Session cache
	12306	PEAP authentication succeeded
	11503	Prepared EAP-Success
	11002	Returned RADIUS Access-Accept

Craig Hyps · ‎06-04-2018

To add to Tim's comment, you are matching PermitAccess Authorization Profile which cannot be modified, which also means that you cannot be returning a new VLAN assignment. First make sure you match correct authorization.

View solution in original post

Timothy Abbott · ‎06-04-2018

Hi,

At first glance, it appears that an incorrect authorization rule is being applied. Please verify that the correct rule is being matched.

Regards,

-Tim

craiglebutt · ‎06-04-2018

Hi, the laptop is authenticating and getting the IP.

Looks correct, which part are you referring to?

cheers

Timothy Abbott · ‎06-04-2018

Maybe I’m not understanding you’re question. It sounds like the endpoint is not getting put in the right VLAN. If that is the case, I suggest checking to make sure the correct authorization rule is matched.

Regards,

-Tim

Craig Hyps · ‎06-04-2018

To add to Tim's comment, you are matching PermitAccess Authorization Profile which cannot be modified, which also means that you cannot be returning a new VLAN assignment. First make sure you match correct authorization.

craiglebutt · ‎06-06-2018

Hi

Thanks for replying, I see what you mean, it's only hitting the default Profile, need to try and figure this out logically, I work better from looking at examples

cheers

hslai · ‎06-07-2018

The steps does not seem matching your word doc.

== Steps ==

...

	15004	Matched rule - Basic_Authenticated_Access
	15016	Selected Authorization Profile - PermitAccess

...

== Word doc ==

No authorization policy rule with a name "Basic_Authenticated_Access"

Assuming your word doc is correct, your endpoint is giving the authz profile "vlan", and the screenshot of tunnel attributes, including Tunnel-Private-Group-ID, is from the auth detail report, then I think VLAN 631 not configured on your WLC or some configuration issue. Please check whether your WLC has an interface and IP configured for this VLAN. You may debug further on WLC with WLC CLI commands -- "debug client <mac>" and "debug aaa event enabled"

craiglebutt · ‎06-08-2018

hi

All VLANS are trunked on the WLC, this is a mirror image of our live system. I disabled the default policy, so only would connect if hits the correct one.

What have found is the devices is connecting, but authenticating now under PC host name and not AD User Name which the but still not applying the vlan still.

Just trying to get my head round it again

cheers

hslai · ‎06-08-2018

Please ensure an interface created in WLC with VLAN 631.

For instance, I wanted to overwrite a WLAN default to VLAN 50 to 51 so I created a new interface for VLAN 51 in the screenshot below.

Anyhow, the WLC debug should tell why it's not working.

craiglebutt · ‎06-08-2018

HI

already applied, I've attached the debug as well, any help appreciated cheers

craiglebutt · ‎06-08-2018

Thanks for all reply's, now got it working.

Not quiet how the video showed

cheers

hslai · ‎06-08-2018

If possible, please update us what was the missing piece and how you figured it out.

I believe Hosuk's video emphasizing the configurations on the ISE side, but not the network device side..

craiglebutt · ‎06-14-2018

Hi

In the end I removed and started from scratch, tested how it was done in the video again, didn't work. So instead added users in Identity Management, created User ID Group and then created Auth Policy for vlan631. then built the policy set.

cheers