10-29-2012 02:47 PM - edited 03-10-2019 07:43 PM
I was wondering if we can do EAP Chaining with PEAP (Not EAP-FAST). For some reason it is not working for me.
Ds
Solved! Go to Solution.
11-01-2012 07:08 PM
I think the short answer is "No" but it is a bit more complex than that becuase you are going to use EAP-FAST, EAP-MS-CHAPv2 nad EAP-TLS. I haven't deployed this myself but here is a link to a good document that describes the EAP-Chaining process along with requirements:
Thank you for rating!
11-01-2012 07:08 PM
I think the short answer is "No" but it is a bit more complex than that becuase you are going to use EAP-FAST, EAP-MS-CHAPv2 nad EAP-TLS. I haven't deployed this myself but here is a link to a good document that describes the EAP-Chaining process along with requirements:
Thank you for rating!
11-12-2012 03:06 PM
Hi,
at this moment it's supported only under FAST. If you have problem with windows supplicant, you can use latest AnyConnect 3.1. I've tested that and works great.
12-10-2012 08:00 AM
Thanks Guys!
Ds
12-10-2012 09:37 AM
You are welcome! If your issue/questions was resolved you should probably mark this thread as "answered"
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide