01-25-2010 05:22 AM - edited 03-10-2019 04:54 PM
Hello,
I want to set up the ACS 5.1 for dot1x-Port authentication. I want to make a machine authentication against an AD-Domain and I got the following error Message:
01-25-2010 07:19 AM
Hi Torsten,
Did you enable " Perform Binary Certificate Comparison with Certificate retrieved from LDAP or Active Director" in acs-->Users and Identity Stores-->Local certificate-->Edit ?
Regards,
~JG
01-25-2010 07:41 AM
Hi,
I can't find this point 'acs-->Users and Identity Stores-->Local certificate-->Edit ?' in my ACS-Webpage.
I have under 'Users and Identity Stores' only Certificate Authorities, Certificate Authentication Profile and Identity Store Sequences.
But I use a Certificate Authentication Profile in wich I selectet 'Perform Binary Certificate Comparison with Certificate retrieved from LDAP or Active Directory '
Regardes
Torsten
01-26-2010 03:26 AM
Hi Torsten,
The option you are looking for is under system configuration:
Under acs-->Users and Identity Stores-->Local certificate-->Edit. You can only import/configure CA certificate:
HTH
Regards,
JK
Plz rate helpful posts-
01-26-2010 03:48 AM
Hi,
yes on this point I import my CA-Certifacte and bind ist to the Protocol EAP and Management Interface. (both points I can select on the edit page). That was done before I open the case. The error must be on an other Topic. But I don't no where. Would it help if I send some Hardcopys of Configpages? So please tell me which one you need.
King regardes
Torsten
04-13-2010 11:20 AM
Torsten,
Were you able to get this resolved?
Tim
08-11-2010 07:48 AM
Hi, I am using the Certitifcate from CA server. so binding the " Local Server Certificates" and "CA Certificates" with the same certificate right?
04-14-2010 01:09 AM
Hi These,
I installed cisco ACS 5.1 version in Vmware server successfully. Now I am trying to join this ACS server into my Windows Active Directory ( 2008 ). While trying the same i am unable to join this active directory.
Error which i got while trying the same as " Can not resolve network address "
I already verified with Domain name, Dns ip address and domain name resolve and network reachailbility and access permission with rights to join active directory..
Please help in this to complete the activity and let me now how you done this with what procedure do you followed.
Regards
Manikandan
04-14-2010 06:32 AM
Please make sure that ACS and AD are on same timezone. From ACS cli issue command "show clock"
Timezone is to be configured manually on acs. So Time and timezone needs to be same.
Regards,
~JG
Do rate helpful posts
04-16-2010 11:58 PM
Hi Jagdeep,
Thanks alot and i find the problem. Its actually in AD timezone is mentioned wrong thats why i am not able to join in my AD.
Yea now I am able to join my ACS into AD without any issues. One more think, after joined to AD my ACS will showing wrong timing while checking the AAA logs. But, in ACS GUI as weel as CLI it showing correct timing only.
Please suggest me in this and let me what could the reason for this problem.
Regards
Manikandan
08-10-2011 09:01 PM
Wouldn't there be a 'clock skew' error if the timezone's were different ?
07-08-2010 08:21 PM
Hi Torsten,
I am having the same problem - did you ever get this resolved? Doing local ACS cert auth (as part of the AD certficate chain setup) works for machine auth instead of binary comparison against cert pulled from AD , but I need the AD integrated features to check dial in properties etc - and when I have binary comparison on, user auth works and machine auth gets this problem you describe.
Cheers,
Nick
07-13-2010 06:47 PM
10-31-2011 01:14 PM
I am using ACS 5.3 and i had the same error "Binary comparison of certificates failed" .
The issue was that in AD the group Cert Publisher was not added to the users which mean that the Certificate was not present in AD. After adding the users to this group and delete and request a new cert for the user, all works fine
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide