08-27-2007 03:54 AM - edited 03-10-2019 03:21 PM
hi,
I tried to authenticate and authorized Nokia/checkpoint Nortel/AD3 and Nortel 5510 platform using an 4.1 for windows ACS. the ACCESS-REQUEST is well processed bi the radius server wich send ACCESS-ACCEPT to the AAA Client (ie NORTEL or NOKIA), but i'have got privilege access denied on the Client side.
RADIUS IETF Dictionnary is used for every device.
all others Cisco Devices authenticate and are well authorized.
I didn't found any documentation about this item.
best regards
Alain
08-28-2007 08:29 AM
Hi,
You need to configure proper parameters in ACS based on the device requirement which you can get from the vendor.
To add Vendor Specific Attribute in ACS based on the dictionary file specified by vendor, you need to create an INI file and upload it to windows using following command:
CSUtil.exe -addUDV slot-number filename
Following link can give you more information on the same:
~Rohit
09-03-2007 06:34 AM
Hi,
The vendor specified wich AVpair is needed for Alteon Devices, "administrative" value for number 6 IETF AVpair is required, so this is working fine now.
best regards
Alain
08-27-2011 07:40 PM
hello, alain
I read the your post on CISCO COMMUNITY SUPPORT.
can you send me a VSA Dictionary file for Alteon Devices.
my e-mail address is ycjung@ringnet.co.kr
thanks in advance
YUN CHOUL JUNG
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide