04-25-2022 03:11 AM
i am trying check validation after make repository.. but unfortunatly getting this errors on FTP and SFTP..
FILE name ise-urtbundle-2.7.0.356-1.0.0.SPA.x86_64.tar
Solved! Go to Solution.
04-25-2022 05:08 AM
- FYI : https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvv43383
M.
04-25-2022 05:08 AM
- FYI : https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvv43383
M.
04-25-2022 06:14 AM
Hi @bilal.atif ,
please double check your configuration and access via CLI:
ise/admin# show run
...
repository <repository name>
url ftp://<repository_IP_Addr>/
user <username> password plain <password>
...
and then:
ise/admin# show repository <repository name>
check if you are able to check the Repository, if not, double check you access to this repository.
Note: since you are trying to execute the ise-urtbundle-2.7.0.356-1.0.0.SPA.x86_64.tar, you have the option to
1. Copy the ise-urtbundle-2.7.0.356-1.0.0.SPA.x86_64.tar to the ISE Disk
ise/admin# copy ftp://<IP Addr>/ise-urtbundle-2.7.0.356-1.0.0.SPA.x86_64.tar disk:/
2. Create a Local Repository
repository LOCAL
url disk:/
3. Execute the file
ise/admin# application install ise-urtbundle-2.7.0.356-1.0.0.SPA.x86_64.tar LOCAL
Hope this helps !!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide