01-25-2017 10:56 PM
I,m trying to integrate ISE 2.1 to WLC Aruba 3200 but i have some problem,Authentication Successful when i test via CLI in aruba WLC
but in ise showing this error
error:5440 Endpoint abandoned EAP session and started new
can anyone help me?
Solved! Go to Solution.
01-26-2017 01:33 AM
Ashif,
I recommend open a TAC case to help resolve. Too little information is provided above to quickly get at root of issue.
Be sure to review the 3rd-party integration guides for Aruba here ISE Design & Integration Guides
This one in particular should help: How To: ISE Integration with Aruba Wireless Networks
You may also want to see our Third Party NAD Profiles page which has an example Aruba-7005-NAD-Config
configuration.
For ArubaOS versions > 6.4.2.5 you may need to update the NAD profile with the following:
Service-Type for MAB = "Call-Check"
Service-Type for 802.1X = "Framed"
Regards,
Craig
01-26-2017 01:33 AM
Ashif,
I recommend open a TAC case to help resolve. Too little information is provided above to quickly get at root of issue.
Be sure to review the 3rd-party integration guides for Aruba here ISE Design & Integration Guides
This one in particular should help: How To: ISE Integration with Aruba Wireless Networks
You may also want to see our Third Party NAD Profiles page which has an example Aruba-7005-NAD-Config
configuration.
For ArubaOS versions > 6.4.2.5 you may need to update the NAD profile with the following:
Service-Type for MAB = "Call-Check"
Service-Type for 802.1X = "Framed"
Regards,
Craig
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide