cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3058
Views
5
Helpful
4
Replies

How to integrate ISE 2.4 with SMS gatewat for guest flow

dgaikwad
Level 5
Level 5

Hi Experts,

I want to integrate SMS gateyway for guest flow, but the documents that I am able to find mention about ISE 1.4.

Are the steps for ISE 1.4 and 2.4 the same, or has there been an updated document available out there?

 

Any pointers, much appreciated

 

Thank you,

1 Accepted Solution

Accepted Solutions

The concept and GUI are mostly same. I would recommend looking at sms section under http://cs.co/ise-guides

The documents are not updated to reflect slight changes in GUI

View solution in original post

4 Replies 4

balaji.bandi
Hall of Fame
Hall of Fame

Almost all same may be gui changed as per i know..

 

here is the latest document (make sense ?)

 

https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ise_admin_guide_24/b_ise_admin_guide_24_new_chapter_01111.pdf

 

I have attached one of the good document i used some time back to intergrate with ISE, it was very helpfull to understand, may ne not relavent not sure. but good to share here. if any one interested.

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Thanks for pointing to this document.
It does have the configuration information that I have been looking for.

 

Will test it out and see what are the results I get.

The concept and GUI are mostly same. I would recommend looking at sms section under http://cs.co/ise-guides

The documents are not updated to reflect slight changes in GUI

Yeah, that was one of the reasons I was looking for an updated document.
But, was able to navigate and find the right menus and settings.

I think this will work for now.