06-18-2012 03:49 AM - edited 03-10-2019 07:12 PM
I want to register Secondary ACS with Primary instance, but its show up following error
"This System Failure occured: server cannot be adde to the deploymnet. Server has sam License ID as server PrimaryACS that already exist in the deployment. Your changes have not been saved.Click OK to return to the list page."
I would like to know how i can update the license on secondary acs, as it is being used in production envionment"
06-18-2012 03:59 AM
I assume you are refering to a base license (and not an evaluation one)
Base license cannot be updated directly. However, can achive using the following steps:
- reset configuration of the secondary ACS using the CLI "application reset-config acs"
- wait until command completes and all processes successfully restart
At this point this server is like a newly installed server. When you loginto the GUI for the first time you wil be prompted to enter license information
Note, the step of clearing the configuration is not as drastic as it sounds. In any case when the secondary server joins the deployment its configuration will get overwritten with the configuration taken from the primary. You may need to enter the server certificate after the reset configuration is performed
06-18-2012 04:09 AM
Yes its the base license, and server is located at remote place, I assuem that network setting of ACS will not change.I have a license file with me. But How can i get the server certificate?
06-18-2012 04:20 AM
What certificate are you using for the server? Who installed it?
06-18-2012 04:57 AM
server was installed long back and was configured as distributed system, but recetly i had to update the patch so deregister it from primary acs. I was able to update and register other server back but only one serve is creating the problem
06-18-2012 06:38 AM
The secondary is not being registered to the primary cause you are using the same license for both servers.
You need to have unique license for each server in ACS deployment of primary and other secondaries.
So you need to have new one for the secondary.
-----------------------------------------------------------------
Please Don't Forget to rate correct answers
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide