Install ACS 5.3 on VMware Player?

[snickered]

I get an error when installing ACS on VMware Player (not VMware Workstation).  The error is "specified disk sda in partition command which does not exist."  I found this: https://supportforums.cisco.com/thread/201443 which explains to use the LSI Adapter instead of BusLogic.  The problem is, I don't have this option when creating a new HDD or when I go into the advanced settings after creating the new HDD. 

Is it possible to install ACS 5.3 in the free version, VMware Player?  Maybe there's some .vmx magic someone has figured out...

Thanks!

[Amjad Abdullah]

Yes. Possible.

When Creating the VM choose that you'll install the OS later. Dont let the vm automatically detect the OS.

here are steps by pictures: https://supportforums.cisco.com/thread/2166663

HTH

Amjad

Sent from Cisco Technical Support iPad App

[snickered]

That is what I chose.  Then I mounted the CD, removed the SCSI HDD and added an IDE HDD.  Like I said before, the installation fails with, "specified disk sda in partition command which does not exist."

The link you posted goes to the index of these forums.

[Amjad Abdullah · Accepted solution]

sorry for the wrong link. Updated it above and here it is again:

https://supportforums.cisco.com/thread/2166663

HTH

Amjad

You want to say "Thank you"?
Don't. Just rate the useful answers,
that is more useful than "Thank you".

[snickered]

Thanks partner.  I was entering 60 for HDD size.  Wow... can't believe that was all.