This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.
Hi to all
i'm trying to backup my acs 5.2 "backup acs repository repository application acs" but acs gives me a critical error.
% Creating backup with timestamped filename: acs-121022-1431.tar.gpg
% Error: Insufficient disk space to perform full backup.
% Try lowering the data window on ACSView Data retention under Data Management Configuration.
% Application backup error
how do i lower the data witdow in ACS view?
thanks in adv
Please issue a "show disks" from CLI? Please keep in mind that if this was deployed as a evaluation ACS that adding an additional disk to compensate for the overall supported disk size will not work. You should only see one disk after this command which should total 500G.
*Please rate helpful posts*
the info is strange
disk: 1% used (140068 of 65539868)
temp. space 17% used (1280380 of 8063408)
all internal filesystems have sufficient free space
That is an interesting issue, did you try to reboot this machine, and are you using thin provisioning? If so, that is not supported.
Sent from Cisco Technical Support iPad App
the problem is solved now, i've openned a TAC and the cisco Guy told me how to solve it.
in summary you need to have root access to ACS and then erase de acsview database and put a clean one.
my acsview db has grown to 175GB., this was caused by the misconfiguration of acsview database doesn't being backuped and the purgin was, in this case, not being also done.
so Brian if you hav e the same problem then you need to open a TAC case.