05-10-2010 01:27 PM - edited 03-10-2019 05:07 PM
Hi,
Does anyone knows if it is possible to configure IP Pools on ACS 5.1 so that we can assign those addresses to VPN users using the Policy Elements/Access Policies?
I managed to configure static addresses for single users, but not a pool of addresses to a group of them
Thanks
Solved! Go to Solution.
05-11-2010 07:12 AM
Hi,
Unfortunately, In ACS 5.1, IP pool feature is not supported, please refer to the release notes, under the section 'Features Not Supported':
Relaese Notes
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/release/notes/acs_51_rn.html#wp122068
HTH
JK
Plz rate helpful posts-
05-11-2010 07:12 AM
Hi,
Unfortunately, In ACS 5.1, IP pool feature is not supported, please refer to the release notes, under the section 'Features Not Supported':
Relaese Notes
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/release/notes/acs_51_rn.html#wp122068
HTH
JK
Plz rate helpful posts-
05-12-2010 05:20 PM
Thanks,
This way I will use a DHCP server for assigning IP addresses...
05-13-2010 02:28 AM
Wbarboza,
I would appreciate if you can mark this thread resolved so that other's can benefit from it.
Regds,
JK
11-10-2010 07:53 AM
Hello, reversely I have problem with assigning Fixed IP for users. Can you give me some advice how to do it? Thanks.
11-10-2010 08:04 AM
Someone in this forum posted a detailed procedure on how to assign FIX IP addresses... If you dont find it, I will try to check where I've found it...
11-10-2010 08:07 AM
If you can, please do it. I going through approx 20 articles on this forum now and still cant find anything relevat except this article.
11-10-2010 08:09 AM
11-10-2010 08:14 AM
Thank you very much, it look very good. Do you think that is possible migrate fixed IPs from ACS 4.x to 5.2 if I will set this attribute as is said in your presentation?
11-10-2010 08:49 AM
I think the easiest way to do this is through
import / export
- create the new attribute for IP address
- export the users into a CSV file
- enter the IP address into the CSV file
- import the users back
Need to find a way to get the data out of 4.x and into the CSV file so some manual work will be required
11-10-2010 10:12 AM
Thanks for hint, I will try it tomorrow.
11-10-2010 08:14 AM
Exact, you were the guy!!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide