03-22-2011 03:15 AM - edited 03-10-2019 05:55 PM
Hi All
I need to configure the MAB for the IP phones on the ports that are dot1x enabled
Can I store the MAC addresses of the IP phones somewhere else then on the ACS's Internal hosts?
can it be done in the AD or something similar...?
Regards,
Georges
Solved! Go to Solution.
03-24-2011 12:46 AM
Hi,
You can use wahtever database your AAA server suports as long as you define the mac addresses as users on those databases.
please remember that the mac address and password are the same and must match the format it receives in the RADIUS access request.
Example: if the AAA client (switch) sends the mac address in the format xxxxxxxxxxxx, then you create the user with this format.
If it sends in the format xxxx.xxxx.xxxx, then you need to create the user in this way.
Usually it sends in the format xxxxxxxxxxxx, but worht to check to make sure.
HTH,
Tiago
--
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.
03-24-2011 12:46 AM
Hi,
You can use wahtever database your AAA server suports as long as you define the mac addresses as users on those databases.
please remember that the mac address and password are the same and must match the format it receives in the RADIUS access request.
Example: if the AAA client (switch) sends the mac address in the format xxxxxxxxxxxx, then you create the user with this format.
If it sends in the format xxxx.xxxx.xxxx, then you need to create the user in this way.
Usually it sends in the format xxxxxxxxxxxx, but worht to check to make sure.
HTH,
Tiago
--
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide