03-15-2017 10:35 AM - edited 03-11-2019 12:33 AM
Hello!
Is it possible within ISE 2.1 to limit profiling to certain SSIDs only? (Specifically, the request is to disable it on a Guest SSID, while leaving it enabled on all others.)
Thank you,
Deb
03-15-2017 10:12 PM
As far as I know it's not possible in ISE, even with 2.2.
03-16-2017 02:38 PM
Hi, Marvin.
Thanks for taking the time to respond.
I have also opened an SR with TAC, and if there's any different news from there I'll post it here.
Regards,
Deb
03-16-2017 10:16 PM
On the WLC your enable profiling on each SSID (wireless >> SSID >> advanced options)
03-17-2017 12:49 AM
Angel - that's a good suggerstion.
Correct me if I'm wrong, but that would only cover the Device Sensor aspect of profiling which supplements the normal RADIUS accounting information with that collected locally by the WLC. All of the other probe types enabled on the ISE deployment would continue to attempt to profile the endpoints on the SSID even on the WLANs with local profiling not enabled.
03-17-2017 01:08 AM
Yes, RADIUS probe only ... but for example, he can desactive the ip helper on the respective interface VLAN of SSID also (desactive DHCP Probe)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide