cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

252
Views
1
Helpful
3
Replies
Cisco Employee

ISE 2.2 VM on hyper-V RAM upgrade SR:682494376

Hey Team,

I have a customer facing an issue with upgrading the RAM from 8GB to 16GB on an ISE 2.2 VM running on microsoft Hyper-V.

When the customer attempts the upgrade ISE does not boot.

SR: 682494376

Is there documentation stating that upgrading the RAM on an ISE VM is not supported?

Thanks,

Deon

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

Re: ISE 2.2 VM on hyper-V RAM upgrade SR:682494376

Upgrading the RAM on an ISE VM is supported in 2.2.  I've tested this in my lab.

Regards,

-Tim

View solution in original post

3 REPLIES 3
Highlighted
Cisco Employee

Re: ISE 2.2 VM on hyper-V RAM upgrade SR:682494376

Upgrading the RAM on an ISE VM is supported in 2.2.  I've tested this in my lab.

Regards,

-Tim

View solution in original post

Highlighted
Cisco Employee

Re: ISE 2.2 VM on hyper-V RAM upgrade SR:682494376

Hey Tim,

Which virtualization environment did you test this on? (Hyper-V , VMware, etc..)

Thanks,

Deon

Highlighted
Cisco Employee

Re: ISE 2.2 VM on hyper-V RAM upgrade SR:682494376

Hi Deon,

My test was on VMware so I suppose it could be something specific with Hyper-V.  At any rate, increasing the RAM of an ISE VM is supported.

Regards,

-Tim