06-16-2017 07:44 AM
Hey Team,
I have a customer facing an issue with upgrading the RAM from 8GB to 16GB on an ISE 2.2 VM running on microsoft Hyper-V.
When the customer attempts the upgrade ISE does not boot.
SR: 682494376
Is there documentation stating that upgrading the RAM on an ISE VM is not supported?
Thanks,
Deon
Solved! Go to Solution.
06-16-2017 07:53 AM
Upgrading the RAM on an ISE VM is supported in 2.2. I've tested this in my lab.
Regards,
-Tim
06-16-2017 07:53 AM
Upgrading the RAM on an ISE VM is supported in 2.2. I've tested this in my lab.
Regards,
-Tim
06-16-2017 07:59 AM
Hey Tim,
Which virtualization environment did you test this on? (Hyper-V , VMware, etc..)
Thanks,
Deon
06-16-2017 08:26 AM
Hi Deon,
My test was on VMware so I suppose it could be something specific with Hyper-V. At any rate, increasing the RAM of an ISE VM is supported.
Regards,
-Tim
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide