01-31-2018 01:55 PM - edited 02-21-2020 10:44 AM
Hi to all,
is there any way to create end endopointgroup and setting its parent group via ERS?
I was not able to find a reference to such an attribute in api documentation
If I create a group via ers and than look at it on ISE WEB INTERFACE I find it marked as "Parent Group".
I create from the GUI group A then group B setting A as it's parent. Indeed if I perform a get from both group by ERS in the response the information about parent and childe seem to miss
"resources": [
{
"id": "7e31c9c0-06cb-11e8-b462-00505692ee00",
"name": "B",
"description": "Group B, A's child",
"link": {
"rel": "self",
"href": "https://ISEPAN:9060/ers/config/endpointgroup/7e31c9c0-06cb-11e8-b462-00505692ee00",
"type": "application/xml"
}
{
"id": "bf43fd50-06c8-11e8-b462-00505692ee00",
"name": "A",
"description": "Parent group, B is its child",
"link": {
"rel": "self",
"href": "https://ise-pan-cvl-1.ict.corp.rai.it:9060/ers/config/endpointgroup/bf43fd50-06c8-11e8-b462-00505692ee00",
"type": "application/xml"
}
}
Regards
MM
Solved! Go to Solution.
08-28-2018 01:01 AM
Sorry for the delay, I spoke to a cisco engineer at last cisco live.
So far no solution for this issue.
Regards
MM
05-21-2019 03:57 AM
04-18-2018 07:50 AM
Hello Marco,
Were you able to find a solution to this? Also, do you know if it's possible to at least change the parent group after creation?
04-25-2018 06:25 AM
08-28-2018 01:01 AM
Sorry for the delay, I spoke to a cisco engineer at last cisco live.
So far no solution for this issue.
Regards
MM
05-14-2019 02:20 AM
Hi guys,
I know it's May 2019, but anyone managed to solve this ? by ERS or CLI or ... anything ... :)
Thanks
05-21-2019 03:57 AM
04-23-2020 07:51 AM
Hi
Does anyone know if this has been addressed?
02-26-2021 04:34 AM
Hello,
Still not resolved in ISE 2.6 neither 2.7.
I'll test on 3.0 and let you know.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: