ā01-31-2018 01:55 PM - edited ā02-21-2020 10:44 AM
Hi to all,
is there any way to create end endopointgroup and setting its parent group via ERS?
I was not able to find a reference to such an attribute in api documentation
If I create a group via ers and than look at it on ISE WEB INTERFACE I find it marked as "Parent Group".
I create from the GUI group A then group B setting A as it's parent. Indeed if I perform a get from both group by ERS in the response the information about parent and childe seem to miss
"resources": [
{
"id": "7e31c9c0-06cb-11e8-b462-00505692ee00",
"name": "B",
"description": "Group B, A's child",
"link": {
"rel": "self",
"href": "https://ISEPAN:9060/ers/config/endpointgroup/7e31c9c0-06cb-11e8-b462-00505692ee00",
"type": "application/xml"
}
{
"id": "bf43fd50-06c8-11e8-b462-00505692ee00",
"name": "A",
"description": "Parent group, B is its child",
"link": {
"rel": "self",
"href": "https://ise-pan-cvl-1.ict.corp.rai.it:9060/ers/config/endpointgroup/bf43fd50-06c8-11e8-b462-00505692ee00",
"type": "application/xml"
}
}
Regards
MM
Solved! Go to Solution.
ā08-28-2018 01:01 AM
Sorry for the delay, I spoke to a cisco engineer at last cisco live.
So far no solution for this issue.
Regards
MM
ā05-21-2019 03:57 AM
ā04-18-2018 07:50 AM
Hello Marco,
Were you able to find a solution to this? Also, do you know if it's possible to at least change the parent group after creation?
ā04-25-2018 06:25 AM
ā08-28-2018 01:01 AM
Sorry for the delay, I spoke to a cisco engineer at last cisco live.
So far no solution for this issue.
Regards
MM
ā05-14-2019 02:20 AM
Hi guys,
I know it's May 2019, but anyone managed to solve this ? by ERS or CLI or ... anything ... :)
Thanks
ā05-21-2019 03:57 AM
ā04-23-2020 07:51 AM
Hi
Does anyone know if this has been addressed?
ā02-26-2021 04:34 AM
Hello,
Still not resolved in ISE 2.6 neither 2.7.
I'll test on 3.0 and let you know.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide