cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

834
Views
40
Helpful
1
Replies
old roo
Beginner

ISE 3.0 alarming non-functional

Hi all,

 

I am trying to work out why i am not getting alerted via email when an alarm is triggered in ISE.

 

I have global alarm email addresses specified.

On specific alarms i have multiple email addresses. (My understanding when this is done it overrides the global configuration.

Alarms are enabled.

The triggered alarms are viewable in the dashboard.

The mail server test functions.

 

Is there something i have missed ? Or overlooked ?

 

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
old roo
Beginner

Okay issue was resolved. The mail server was blocking the alerts from the ISE nodes. Adding the IP of ISE nodes to mail server fixed the issue.

 

ISE configuration and understanding was correct.

View solution in original post

1 REPLY 1
old roo
Beginner

Okay issue was resolved. The mail server was blocking the alerts from the ISE nodes. Adding the IP of ISE nodes to mail server fixed the issue.

 

ISE configuration and understanding was correct.

Create
Recognize Your Peers
Content for Community-Ad

ISE Webinars


Miss a previous ISE webinar?
Never miss one again!

CiscoISE on YouTube