Solved: Re: ISE : Add new vendor for network device profile

Nancy Saini · ‎12-11-2019

Is there any way we can add a new vendor shown in the Vendor list while creating a new Network Device Profile.

Arne Bier · ‎12-11-2019

good question - sounds like a feature enhancement request. I think Cisco put "other" in there but it would be handy to make that user configurable. I have not checked ISE 2.7 but your screenshot still applies in ISE 2.6.

View solution in original post

marce1000 · ‎12-11-2019

- Might depend on current ISE version being used and or use a sufficient recent version to get more possibilities.

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Arne Bier · ‎12-11-2019

good question - sounds like a feature enhancement request. I think Cisco put "other" in there but it would be handy to make that user configurable. I have not checked ISE 2.7 but your screenshot still applies in ISE 2.6.

aamadulin.accenture · ‎12-03-2022

We're using ISE version 3.1, "vendor" still not configurable and some well know vendors are not on the list.

ahollifield · ‎12-05-2022

These can certainly be added under the RADIUS dictionaries section. Along with a custom Network Device Profile.