02-27-2015 04:45 AM - edited 03-10-2019 10:30 PM
Hello,
is it possible, to create some admins with read-only access on the gui in ISE Version 1.2.0.899 Patch 13?
Best regards
Solved! Go to Solution.
02-27-2015 06:01 AM
Hi,
Below is from user guide.
"Read-only functionality is unavailable for any administrative access in Cisco ISE. Regardless of the level of access, any administrator account can modify or delete objects
for which it has permission, on any page that the administrator can access”.
I have tested in the lab as well and granular access like read only is not available. Whatever available at the moment are the pre-defined RBAC rules.
Regards
Kanwal
Note: Please mark answers if they are helpful.
02-27-2015 06:01 AM
Hi,
Below is from user guide.
"Read-only functionality is unavailable for any administrative access in Cisco ISE. Regardless of the level of access, any administrator account can modify or delete objects
for which it has permission, on any page that the administrator can access”.
I have tested in the lab as well and granular access like read only is not available. Whatever available at the moment are the pre-defined RBAC rules.
Regards
Kanwal
Note: Please mark answers if they are helpful.
02-27-2015 06:59 AM
Hi Kanwal,
thanks for your reply!
Best regards
02-28-2015 09:57 PM
Hi,
You can try creating the Admin user and adding him to the Helpdesk Admin Group.
However he will have access only to the Operations tab with Read-Only Access.
He will not be shown any other tabs as well.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide