Modifying an Existing Cisco ISE Administrator
Use this procedure to modify an existing Cisco ISE administrator configuration.
To modify an existing Cisco ISE administrator, complete the following steps:
Step 1 Choose Administration > System > Admin Access > Administrators > Local Administrators.
The Administrators window appears.
Step 2 Check the check box that corresponds to the administrator that you want to modify, and click Edit.
The corresponding Admin User page appears.
Step 3 Modify the values in the following Admin User fields that you want to change.
• Admin User and Status
• Password (if you click the External option, the Password and Re-Enter Password fields are not used)
• User Information
• Account Options
• Admin Groups
Step 4 Click Save to save the modified administrator in the Cisco ISE database.
Please Check the below link which may helpful for you in configuration:
Link-1
http://www.cisco.com/en/US/docs/security/ise/1.1/user_guide/ise_man_identities.html#wp1054711
