cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1060
Views
0
Helpful
2
Replies

ISE for NAC agent and AnyConnect migration

ed89ml
Beginner
Beginner

Hello community

I was wondering if you could help me with the following.

Scenario: upgrading from ISE 1.2 to ISE 2.2 and also will start a migration process from NAC agent 4.9 to AnyConnect

My question here is if ISE 2.2 can work in parallel with both NAC agent and AnyConnect or is there any caveats I should be aware of? (not both installed in the same endpoint at the same time, but several endpoints ones with NAC agent and others with AC) Or if you could recommend a migration best practice process.

Kind regards.

1 Accepted Solution

Accepted Solutions

hslai
Cisco Employee
Cisco Employee

Please configure Client Provisioning policy rules to match what you requiring. For example, below has Guests to use WebAgent and others to use AnyConnect.

Screen Shot 2017-11-07 at 8.49.09 PM.png

View solution in original post

2 Replies 2

hslai
Cisco Employee
Cisco Employee

Please configure Client Provisioning policy rules to match what you requiring. For example, below has Guests to use WebAgent and others to use AnyConnect.

Screen Shot 2017-11-07 at 8.49.09 PM.png

Thanks for your answer.

Regards.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: