ISE Guest portal Setting after login first time

[siugate]

We are setting up Guest Wi-Fi portal and management would like to ask us to do the following:

For the Guest, first time join the guest network

1) connect the guest WiFi SSID

2) login by using the guest login name and password that provided by front desk and display AUP

3) Connect the Wi-FI

When Guest have new session as it had been disconnected

1) connect the guest WiFi SSID

2) no need to login again and need to display the disclaimer page (AUP)

3) Connect the Wi-Fi Network  

4) Customer need to login again after 60 Days 

We have tired to modify the hotspot portal or Guest type but failure. As the flow the guest portal are need customer to do the login before reach the AUP. Is there any other way to work on it?

Regards

Eric 

[Aravind Ravichandran · Accepted solution]

Yes, it is possible by associating the guest users to identity group during the first-time login & create an authorization rule with that identity group & provide permit access.

For all guest access queries, please refer here cs.co/ise-guest

-Aravind

[Jason Kunst · Accepted solution]

Correct this is explained as remember me in the prescriptive guest guide under http://cs.co/ise-guest

For proper reporting you must be running ise 2.4 per the following article

https://community.cisco.com/t5/security-documents/ise-2-3-remember-me-guest-using-guest-endpoint-group-logging/ta-p/3641150