11-13-2016 11:37 AM - edited 03-11-2019 12:13 AM
Hello All,
Did anyone successfully integrate ISE with SCCM? . I am trying to do the integration , but facing some issues. If anyone has a good document explaining the same , please share.
Thanks in advance
Shabeeb
11-13-2016 01:35 PM
Integrate how?
We have used SCCM with several customers to deploy the AnyConnect Secure Mobility Client (VPN module, Network Access Module 802.1x supplicant and ISE Posture Agent)
11-13-2016 09:11 PM
Hi Marvin,
I am also trying with Anyconnect secure mobility client. The issue is that when I choose patch management requirement with "install missing patches" in my posture policy then ISE not pushing that posture requirement to the user.
Thanks
Shabeeb
11-13-2016 09:23 PM
There is a guide for ISE using SCCM as your patch manager. Please check it out here:
https://communities.cisco.com/docs/DOC-66933
After you've reviewed that, please let me know if that answers your question.
11-13-2016 09:34 PM
Hello Marvin,
I had followed this guide and still I am facing the problem.
Thanks
Shabeeb
11-13-2016 09:49 PM
Can you share your posture and authorization policies?
11-14-2016 01:18 PM
11-17-2016 08:13 PM
The screen shots appear to indicate the client was checked for two requirements and met both.
It may be best to just open a TAC case on this and let the assigned engineer look at it in real time.
12-03-2016 01:32 AM
Hello Marvin,
The issue got resolved in 2.1 patch 2. We tested and the policy gets pushed to client properly.
12-03-2016 07:45 PM
Thanks for the update!
07-10-2017 03:54 AM
Hi Shabeeb,
Could you please share the working policies of SCCM integration with ISE . because i am also having requirements to integrate.
Thanks
08-05-2020 11:58 AM
Hello Marvin...are you with Cisco, because my customer is having SCCM integration issues as well
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide