ISE integration with WLC
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-11-2012 10:58 AM - edited 03-10-2019 06:42 PM
Hi All
We have ISE 1.0(4) running on vm ware with base license.We have two normal controller and one anchor controller also.We have to integrate WLC with ISE so that for guest users,ISE will act as the guest portal.Please send me the configuration required on the ISE so that ISE will work as the NAC Guest server for Guest SSID.
Thanks in advance
Anvar
- Labels:
-
AAA
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-11-2012 05:41 PM
Hi anva.
I only able to get the workstation connect to the SSID, then it redirect to ISE guest portal site,
Setting is using LWA web authentication and no dynamic VLAN support. dACL works fine after authentication
Issue now is handheld device can't redirect to ISE guest portal and awaiting Cisco SE troubleshooting on it today.
Kepp you posted you if everything settle.
cheers, xoxox0
Noel
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-12-2012 01:42 AM
Hi Noel
Thank you very much for the information.Colud you please tell what is the configuration on WLC and ISE for Guest portal (redirection from ISE).
Thanks in advance
Anvar
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-08-2013 05:48 PM
Hello,
To integrate ISE with WLC, I am giving you a link, which will guide you step by step ISE integration with WLC.
