02-05-2013 08:24 AM - edited 03-10-2019 08:03 PM
Dear Team,
Please help me for the below mentioned ISE deployment
I want to deploy ISE in a DC & DR environmental. There are two WAN links used for both location at a time e.g.
1. A (DC) & B (DR) if either of the link down then traffic will be forward by the other location either A or B.
2. There are MPLS connectivity between DC & DR sites.
3. I want to go with two ISE appliances (2 for each sites).
4. Please suggest license option for 500 users (Basic+ advance).
5. Shall I require only one license for all the appliances (Basic+ Advance).
6. I want to run both the site active at a time.
Please suggest appr. license for all the appliances in this case.
Thanks & regards,
Rajesh Kumar
Solved! Go to Solution.
02-22-2013 01:45 PM
You apply the Licenses only on Admin node. You will need only 1 set of licenses
02-22-2013 01:45 PM
You apply the Licenses only on Admin node. You will need only 1 set of licenses
03-03-2013 10:24 PM
Dear Shekhar,
Thanks,
Can you tell me one thing more, If one location is in India(DC) and second location in USA(DR).Then 1 set of license (Basic_Advance) will work for both location as suggest by you earlier.
Regards,
Rajesh
03-04-2013 07:01 AM
Hello Rajesh,
As you asked me again, I think you have some doubts.
We will need just one set of Lincense per primary Admin persona per ISE deployment.
I think you have ISE deployment as follows.
India (DC) - ISE1:Admin&MnT (Primary) + ISE2:PSN
USA (DR) - ISE3:Admin&MnT (Secondary) + ISE4:PSN
If you have above mentioned scenario then you will need to install only one set of license on India (DC) - Admin&MnT (Primary)
But If you have a ISE deployment as follows then you will need two sets of license.
India (DC) - ISE1: (Primary)Admin&MnT&PSN + ISE2:(Secondary)Admin&MnT&PSN
USA (DR) - ISE1: (Primary)Admin&MnT&PSN + ISE2:(Secondary)Admin&MnT&PSN
The Above mentioned deployement are completly saperate ISE deployments. so here you will need two sets of license one on India (DC) - ISE1: (Primary)Admin&MnT&PSN and second on USA (DR) - ISE1: (Primary)Admin&MnT&PSN
Please let me know what kind of ISE deployment you are planning for...
Thanks,
Chandrashekhar More
03-10-2013 09:19 PM
Dear Shekhar,
Thanks, I got my answer.
Regards,
Rajesh
03-06-2013 07:42 PM
As per your scenario and assuming you are using HA for ISE that mean only one instance of ISE is running so you need 1 set of basic + advanced licence i.e L-ISE-ADV3Y-500= , L-ISE-BSE-500=
Note license is applied for ISE instance rather that appliance
03-10-2013 09:21 PM
Dear Venkatesh,
Thanks,
Regards,
Rajesh
09-25-2013 11:21 PM
Hi Rejesh,
FYI, ISE 1.2 now inlcudes the feature of 'Rehosting'.Rehosting allows the customer to reassign an existing ISE license to another ISE appliance, acting as a Primary and/or Secondary Node. Customers can use the rehosting feature to modify their existing ISE license (registered to a single node) to be supported on Primary and Secondary ISE Administration Nodes or just a new Primary node. The license term is not changed when rehosted.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide