ISE Neat with non-cisco switch

[cxo-179682]

Hi,

As the title suggest, we are trying to implement dot1x for a WAP device which needs to be on a trunk port (with native vlan), but facing with challenges to achieve it, know it will work if it's a Cisco switch, unfortunately we are not deploying Cisco at this location. Anyone managed to make it work with a non-Cisco ? 

Thanks in advance.

[lrojaslo · Accepted solution]

For such scenario you will need to ask to your 3rd party vendor if the network device is capable to act as Dot1x supplicant for NEAT, not all devices will act the same way or have same capabilities.