07-02-2019 03:32 AM
Hi. everyone.
I want "Anyconnect system scan" to work on all PCs.
However, some "WINDOW10" does not run "System scan".
PCs that do not have a "system scan" in common have a "no policy server detected" message.
Another commonality is that Security Products does not show anything.
Attach the screenshot below.
Please help me ...
Solved! Go to Solution.
07-05-2019 03:18 PM
This appears a configuration issue. Please check out the following:
07-31-2019 11:47 PM
03-25-2020 05:58 PM
07-02-2019 05:16 AM
07-05-2019 03:18 PM
This appears a configuration issue. Please check out the following:
07-31-2019 11:47 PM
11-12-2019 07:49 AM
Hi could you shared ASA configuration call home list
03-25-2020 05:58 PM
Sorry for the late response.
Enter IP or FQDN in the call home list.
04-09-2020 09:04 PM
Hi
We have a problem where we are still getting no policy server detected on endpoints. We do not have any proxy configured on ISE or endpoints. We have also configured Call home list but we are still facing the issue.
Thanks,
Aravind.
11-12-2019 08:42 AM
11-12-2019 09:39 AM
Hi, we used ASA to provision posture module, it work OK, but error appear saying No policy Server detected.
03-12-2020 09:50 AM
Did you left your DH empty on your solution? and only have the Call-home list with the PSN fqdn/ip address?
03-25-2020 06:00 PM
12-21-2020 07:24 PM
Hi Snika,
Your provided screenshot is not clear. So at Discovery Host which IP did you configure ?
12-22-2020 01:07 AM
Enter the ISE IP
12-23-2020 11:16 AM
Hello Snika,
What was the version back then when you encountered this issue ?
12-23-2020 07:16 PM
2.6 patch 1
Are you troubled with this problem?
The method I have presented in this article can be one of many.
In my experience the problem of not finding the server was mostly anyconnect's problem.
You must delete all of the C:\ProgramData\Cisco directory after deleting AnyConnect.
Then reinstall and check the condition again.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide