07-12-2024 01:16 AM
Dear All,
We have new installed the Sangfor EDR client endpoint version 6.0.2EN
Our ise version 3.1.0 patch 9. in "am condition" we did not find a suitable version of sangfor so posture cannot be done
For information, we have also used the updated posture module and updated compliance module.
is there a link to report to "cisco posture team" or does it have to be open tac?
THANKS,
Solved! Go to Solution.
07-14-2024 03:25 PM
This is the most recent supported version as documented in the latest Compliance Module Support Charts. As stated in that document:
"To request support for unsupported products or versions, raise an enhancement request."
07-12-2024 01:40 AM
@faruqfarkhan does ISE have the latest posture updates downloaded?
07-12-2024 06:29 AM
@Rob Ingram Yess ISE have the latest posture updates
07-14-2024 03:25 PM
This is the most recent supported version as documented in the latest Compliance Module Support Charts. As stated in that document:
"To request support for unsupported products or versions, raise an enhancement request."
07-24-2024 06:24 PM
Dear @Greg Gibbs & @Rob Ingram,
I'm posting this update so if someone faces an issue like this, they know what to do.
>I couldn't find the link to raise an enhancement request, so I opened a TAC case.
>TAC checked and found that my application is not compatible with any antimalware condition.
>TAC raised an enhancement request: "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwk83606"
>I guess I will wait until they add my product to the posturing list.
Thank you both for your help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide