05-15-2015 12:20 AM - edited 03-12-2019 05:45 PM
05-20-2015 04:22 PM
Hello Malik,
Any news on that? you could try to download agent manually from Cisco's web site and install them as offline package.
In my case, it didnt work :(
am using 1.4 maybe it will work on 1.3 ( no package for 1.4 yet )
i think i'll open a TAC to fix that
05-24-2015 05:22 AM
Hello Eric and Venkatesh.
I got all ports open for the ISE server on the firewalls. The capture showed that it sent traffic to cisco domain starting with 72.X.X.X and then the connection was reset from the far end.
I didn't change anything and it started working again.
I think ISE has a mind of its own :)
05-21-2015 01:23 AM
if you are not able to download resource from Cisco site then check if Firewall blocking port 443, Proxy configuration required for Internet access in our network and if its not configured, also enable ISE default Trusted Certificates named Baltimore CyberTrust Root and Thawte Root CA if they have been disabled
05-21-2015 07:57 AM
Thx Venkatesh
the cert did fix my issue
Thx
03-06-2018 01:22 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Hi All,
I am facing an issue with the client provisioning resource download.
It fails when i try to download resources from Cisco site with the below error.
Connection to the remote site has failed. Verify that the remote site is available and/or related ISE administration settings are correct.
my DNS can resolve www.cisco.com. Internet is working. I can ping and trace the website.
Can you please help.
thanks