cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2673
Views
25
Helpful
2
Replies

ISE - report older than 30 days

pnavratil
Level 1
Level 1

Hi all,

I cannot find a way how to make report in ISE for records older then 30 days - there used to be "Custom" where I was able to set from and to date but now there is only Today, Yesterday, last 7 days and Last 30 Days but we need to get records older then this.

I checked ISE version 2.2 and 2.3 (last patches) - both the same.

Thank you for any hlep

Regards

 

Pavel

1 Accepted Solution

Accepted Solutions

Shinpei Kono
Cisco Employee
Cisco Employee

Hope you have solved the problem already but I think you have to go and select "Filter > Advanced Filter" in your report first, which then allows you to select "Logged At" with "Custom" range to retrieve records older than 30 days.

ISE 2.2
2.2-Report.png

View solution in original post

2 Replies 2

Shinpei Kono
Cisco Employee
Cisco Employee

Hope you have solved the problem already but I think you have to go and select "Filter > Advanced Filter" in your report first, which then allows you to select "Logged At" with "Custom" range to retrieve records older than 30 days.

ISE 2.2
2.2-Report.png

Yes, I found it too - I am sorry for not updating this stream.