Solved: ISE update and patch

torstensson · ‎11-22-2021

Hi all!

I'm planning on updating ISE (VMware) from version 2.6.0.156 to 2.7.0.356 through the GUI. As I understand I need to do the following:

- Follow the guide, backup and run the URT

- Download and run "Upgrade bundle for upgrading ISE version 2.2, 2.3, 2.4, 2.6 to 2.7. This is a signed bundle for image integrity." to the repository

- When the bundle is installed run the patch "Cisco Identity Services Engine Software Patch Version 2.7.0.356-Patch6-21110108 Apply this patch to an existing ISE 2.7.0 installation."

In other words, do I need to install the 2.7 "base" and then run the patch?

Br

Lars

marce1000 · ‎11-22-2021

>In other words, do I need to install the 2.7 "base" and then run the patch

Yes,

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

View solution in original post

marce1000 · ‎11-22-2021

>In other words, do I need to install the 2.7 "base" and then run the patch

Yes,

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '