05-22-2013 05:53 AM - edited 03-10-2019 08:27 PM
Hello,
I'm currently studying a solution for AAA in my company. Since I've got an almost full Cisco network architecture, I've read a lot about ISE.
But recently I hear about Packet Fence, an open source project which seems to offer the same features.
So I'd like to get some of your advices about this software against ISE : is it worth it to get it ? What are advantages and drawbacks of this one ?
Since we're on a Cisco forum i'm not expecting you to tell me that Packet Fence is better, but I'd just like to get objective reviews.
Thankfully,
Yoshipower.
06-08-2013 09:18 PM
Hello Yoshipower,
I have gone through PacketFence features and I appreciate as an open source it is providing lot of features which is available in Cisco ISE. But I would like to inform you that it does not provide Mobile device Management Technology which is provided by ISE. ISE is providing Real-time Location tracking system as well as it is supported connected mobile experience and moreover highly qualified engineer to support the customer as and when they needed.
For more deatil on ISE you can go to below link.
www.cisco.com/en/US/prod/collateral/vpndevc/ps5712/ps11640/at_a_glance_c45-726284.pdf
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5712/ps11637/ps11195/qa_c67-658591.html
07-05-2013 09:34 AM
Hi Ravi,
I am also looking at the same options and I was heading entirely in the ISE direction until I realised that there is not full support for non-WLC WiFi systems. So since I have an AP1141 this seems to mean that I would be as well to go with Packet Fence as the best I will get from either solution is basic 802.1x authentication?
Footnote number 4 on Table 1 of this document seems to cover most of the limitations:-
http://www.cisco.com/en/US/docs/security/ise/1.0.4/compatibility/ise104_sdt.html
"Wireless LAN Controllers (WLCs) do not support downloadable ACLs (dACLs), but support named ACLs. WLCs prior to release 7.0.116.0 do not support CoA and require deployment of an ISE Inline Posture Node to support posture services. Use of Inline Posture Node requires WLC version 7.0.98 or later. Autonomous AP deployments (no WLC) also require deployment of an Inline Posture Node for posture support. Profiling services are currently supported for 802.1X-authenticated WLANs only on the WLC with CoA support. HREAP is not supported. WLCs do not currently support MAC Authentication Bypass (MAB)."
So based on the above the ISE is not able to offer me profiling services or CoA. And I can only get posture support if I have an inline node everywhere that I have an AP?
Thanks
David
07-06-2013 05:13 PM
This is my observation without an understanding of packet fence, I apologize for this being one sided.
One of the main features of ise is the view that you get with dashboard and the troubleshooting ease thay comes with this software. You can view how users are gaining access through your network whether that is vpn wired or wireless.
Also ise is designed to grow with your network so if you have plans on building a wireless infrastructure you can start with the base features, or better yet obtain the iso that comes with a 90 day base and advanced license that can be run on a virtual machine so you can see it alongside the packetfence.
In the end you have to weigh your options when it comes to your business requirements and yiur network demands. Are you looking to support a full byod infrastructure with posture and mdm integration? Also what are your expectations as far as support. Cisco AAA is designed to handle all user authentication issues whether that is supplicant provisioning, dot1x configuration on the network device, along with assisting with ise configuration, and external database troubleshooting if its ldap, ad, radius or token servers. In the end this depends on your current needs and what the network is ready for.
My apologies for the dissertation, I hope this helps!
Sent from Cisco Technical Support Android App
06-18-2019 10:17 AM
Curious to see what the Packetfence users thought about PF support?
06-18-2019 10:27 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide