Missing NetworkAccess UseCase in ISE 2.6

[JustTakeTheFirstStep]

Hi

I used to use "Network Access:UseCase EQUALS Guest Flow" as the selection criteria to choose Captive Portal authentication in the Policy section. With ISE 2.6 I see no UseCase option anymore...

I refer to the guide below.

https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/115732-central-web-auth-00.html

Is this a expected behaviour? What is the best alternative?

Regards

[Francesco Molino · Accepted solution]

Hi

You should get the guestflow as predefined in your left menu or you can use it.
See my screenshot, using ISE 2.7.