05-16-2012 02:06 AM - edited 03-10-2019 07:05 PM
Hi all,
I want to be able to use remote authentication on our Motorola RF controllers using Cisco ACS 5.2. We have the VSA loaded and we can choose the different user roles apart from 'Superuser'.
The reason for this is that the attribute ID for the 'SuperUser' role is 32768 and but Attribute ID within ACS can only take 3 digits (see fig.1 attached)
Has anyone had any experience of this and/or knows how to change this field to all for more than 3 digits?
Any help will be much appreciated.
Thanks
John
Solved! Go to Solution.
05-16-2012 06:06 AM
I can see the issue you are refering to and does appear to be a bug - will dig out if there is one and if not open
A work around would be to not use an Attribute Type of enumeration but rather an Unsigned integer
Would then need to enter the value directly in the authorization profile rather than selecting from an enumeration
05-16-2012 06:06 AM
I can see the issue you are refering to and does appear to be a bug - will dig out if there is one and if not open
A work around would be to not use an Attribute Type of enumeration but rather an Unsigned integer
Would then need to enter the value directly in the authorization profile rather than selecting from an enumeration
05-17-2012 01:27 AM
Thank you very much. Worked a treat!
If could find any info for this bug could you keep me updated?
Thanks
John
05-17-2012 02:06 AM
Glad this helped. I opened a CDETS to document this issue. It should be resolved in ACS 5.4 which is currently planned to be available in the September timeframe
CSCtz93947: Can't create enumerated RADIUS attribute with ID of more than 3 digits
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide