cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

270
Views
25
Helpful
2
Replies
laurathaqi
Beginner

Network Device in Cisco ISE Stage option unavailable - ISE 3.0

Hi all, 

 

I am trying to find the Stage option when adding a Network Device, however I can not see it in the GUI of SIE 3.0 

The Stage: Monitoring option is what I am looking for. Any Idea if it was removed to another concept, as in previous version, it was available in the Add New Network Device option. 

 

Please find the image attached for more clarification of what I am looking for, but unable to find in the ISE 3.0 version. 

 

 

Thank you,

Laura 

2 ACCEPTED SOLUTIONS

Accepted Solutions
Rob Ingram
VIP Mentor

Hi @laurathaqi 

I don't think that is built in to ISE 3.0, you just need to create a Network Device Group called "Stage" and sub-groups for the Monitor, Closed and Low-Impact modes.

 

123.PNG

View solution in original post

Marcelo Morais
Advocate

Hi @laurathaqi ,

 at Administration > Network Resources > Network Device Groups, Add the following:

AddGroup.png

After that, you are able to check the Stage at Administration > Network Resources > Network Devices.

 

Hope this helps !!!

View solution in original post

2 REPLIES 2
Rob Ingram
VIP Mentor

Hi @laurathaqi 

I don't think that is built in to ISE 3.0, you just need to create a Network Device Group called "Stage" and sub-groups for the Monitor, Closed and Low-Impact modes.

 

123.PNG

View solution in original post

Marcelo Morais
Advocate

Hi @laurathaqi ,

 at Administration > Network Resources > Network Device Groups, Add the following:

AddGroup.png

After that, you are able to check the Stage at Administration > Network Resources > Network Devices.

 

Hope this helps !!!

View solution in original post

Create
Recognize Your Peers
Content for Community-Ad

ISE Webinars



Did you miss a previous ISE webinar?

CiscoISE YouTube Channel