12-22-2009 01:15 AM - edited 03-10-2019 04:51 PM
I am new to cisco security. I have problem in ACS 5.0. Can somebody guide me in configuring the ACS or I Really need book that has step by step procedure to adding users ,network device group, policies and access policies...plss
12-23-2009 12:12 AM
Hi,
Depending on the requirement you can go ahead with configuration. I mean, ACS can be used to grant users access to devices' administration (ex: administration of Routers, Switches etc) and also for Network access (ex. access to network resources).
You can refer to following URLs:
I hope it help you to configure ACS. All the best.
Regards,
Bhushan
12-31-2009 08:14 AM
Hi,
Check out the below link on complete installation and configuration guide for Cisco ACS 5.0
Hope this helps out your query !!
Regards
Ganesh.H
12-31-2009 08:37 AM
These are the links for the general ACS 5.X configuration:
http://www.cisco.com/en/US/products/ps9911/products_user_guide_list.html
http://www.cisco.com/en/US/products/ps9911/prod_installation_guides_list.html
It would be recommended to read the guide, start working your way up, once you have some issues then let us know so we can try to help you out with what we can...
HTH
02-03-2010 10:43 PM
thanks guys, from the sites that you have given i started the acs configuration, that works fine. But whenever i use enable i got an error message like Authentication failed.
My configuration goes like this
aaa new-model
aaa authentication login telnet_lines group tacacs+
aaa authentication enable default group tacacs+ enable----------when i use this command i got AUTHENTICATION FAILED
enable password cisco
aaa session-id common
tacacs-server host 172.17.11.19 key cisco
line vty 0 4
authorization commands 15 telnet_lines
authorization exec telnet_lines
login authentication telnet_lines
guys, I am using ACS 5.0. What should i do with this?
thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide