Open port 22 on ACS running 4.1

[siddhartham]

Can someone let me know how to open port 22 on Cisco ACS server running version 4.1 (I know its an end of support version, trying to get a maintainance window to update it) so that we can SSH into it.Below is the screen shot of the current open ports from appliance status page.

Siddhartha       

[Tarik Admani]

You can only manage the solution engine using console. There aren't many commands available through ssh.

Sent from Cisco Technical Support iPad App

[siddhartham]

Thats fine, can you let me know how open the port

Siddhartha

[Tarik Admani · Accepted solution]

My apologies, it looks like ssh connectivity was released in ACS 4.2 for remote RDBMS connectivity through ssh:

http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5712/ps5338/product_bulletin_c25-453391.html

Relational database management system (RDBMS)  synchronization enhancements: ACS has programmatic interface additions  for downloadable access control list (ACL) synchronization. ACS Solution  Engine now also supports scriptable RDBMS synchronization through a  Secure Shell (SSH) Protocol client.

Sorry for the confusion, it looks like you cannot connect remotely via ssh, you will have to use the serial/console port.

Thanks,

Tarik Admani
*Please rate helpful posts*

[siddhartham]

Thanks for the response.

Siddhartha