06-27-2006 05:59 AM - edited 03-10-2019 02:38 PM
i have CS ACS SE and i want to run peap for widnows EAP-MSCHAPv2 what is the correct CA in the trusted root certification Authorities list i ahve to choos in windows client
06-27-2006 06:52 AM
You need to look for a certificate name that was kept at the time to generating self sign cert.
06-28-2006 01:34 AM
Did that mean i have to copy the certificate whihc i genertaed and install it in eahc client to be shown in the list
or haw i can shaw it in list without installing it
06-28-2006 04:47 AM
Yes, you need to install the cert on each client. However if you want to avoid installing it on each client then we need to make sure"Validate Server
Certificate" option under PEAP properties on client is UNCHECKED.
07-04-2006 09:47 PM
The client needs the root certificate of the CA. Hence if you are using certificates from Verisign or something similar then your client (Windows) already has the root cert.
But if you are using your own Ms. CA then you can push certificates through Active Directory. That way manual installation can be eliminated.
Otherwise either manual installation or unchecking "Validate Server Certificate" are the only options.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide