Network Access Control

Hello,I used this example for making VPND server with radius auth for WinXP SP2 users - http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a008009436a.shtmlBut users cant pass auth - in ACS logs i see what everyt...

Hello,A client of mine is currently running ACS 2.6 on a Windows NT server. They have configured the Unknow User Policy to check the local Windows Database for any users that are not found in the ACS internal database. Is there any way to import th...

Hi thereIs it posible to implement (wireless) NAC by an ACS ?Or do I need a NAC appliance ?GR.Remco

I am using ACS 3.3 and would like to assign a privilege to someone who have full right for switch and read-only for router. However, ACS only allow assigned single group in user setup. How can I configure for meet this requirement?Thank You.Ray

Hello all,I have configured an ASA 5510 which is currently connected to the network but I am unable to gain access through the HTTPS to it nor am I able to connect to it through ASDM. I have attached the running config of the firewall, please check i...

I know that nested groups isn't supported on ACS 4.0, but, is it on ACS 4.1 ???See note in page 77http://www.cisco.com/global/IT/solutions/ent/tecnologie/wireless/pdf/avvid_implementation_guide.pdfRegards,Maximiliano.

We're trying to keep ftp out of our network and I'd like to know if there is anyway to get sftp to work with the ACS Applicance or if there's another option for backups/restores other than ftp?

Can any one assist on getting the 3.3.3 ver of ACS.The objective is to upgrade from 3.2(3) to 4.1. Appreciate your inputs on this.

I upgraded the ACS from 4.0 to 4.1 and suddenly the scripts that I use for management stopped working.I could solve all the issues except for 1:D:\>net stop csauthThe CSAuth servce is stopping.The CSAuth servce was stopped successfully.D:>csutil.exe ...

I'm a bit curious about the way the cisco ACS engine (the cisco-built hardware) sets up servers initially. Most of the documentation I have is for windows, so I was a bit confused when, after the initial configuration there were two "AAA Servers" sh...

Hello,I dont think a user can be a member of two different groups but is it possible to nest the groups that a user belongs in? Scenario is that we would like AAA on wireless users which some will also be VPN users. Of course we only have one ACS s...

I have Cisco ACS 4.1 build 23 patch 5 installed onWindows 2003 Enterprise Edtition Server withService Pack 2. This Win2k3, called Win2k3-AD1,is also an AD controller. On this AD controller I also installed RSA SecurID Server and I integrate SecurID...

Hi, I'm new in this forum. I'm trying to configure a VPN tunnel using PIX, ACS and certificates. I can make the VPN tunnel but I can't push an IP address from the ACS ip pools to the VPN Client. Someone can help my?. I need to use Cisco RADIUS av-...